What to Do with an Overflowing Toilet

What to Do with an Overflowing Toilet

The moment you wake up, you are prepared to take on the day’s challenges like a rockstar. Everything you need is prepared, and all you have to do is do your daily bathroom business. But, the moment you go in, you’re greeted with an overflowing toilet!

Your emotions overflow, too, as you have no idea how and why it occurred in the first place? Could it be there were or were chances to fix it earlier, but you weren’t paying much attention at all? All the blame and regret won’t help anymore.

The next best thing you have to do is know what to do with an overflowing toilet. Would you like to know what steps you may take? You’re in the right place, and here’s what you need to know and do!

1 Check the Toilet’s Water Tank

For this, you have to remove the lid and then reach your hand inside the toilet tank. When you have touched the float or fill valve, lift it so you can stop the process of water refilling itself in. Find a way to keep the float up so that no water will come in the tank.

2 The Water Supply Has to be Turned Off

Well, you certainly do not want the water to continue coming in the tank? Because it’s inevitable to cause more overflowing. So, it’s wise to find the water supply immediately and turn it off. You’ll often locate it with ease because it’s the pipe with a valve near the toilet’s base.

Emergency Plumbing Tips: What to Do if the Toilet Overflows | American  Plumbing Services

3 Why Not Turn off the Water Supply Altogether?

Sure, it’s understandable that you feel panicky and do not want to deal with more water seeping out from the toilet. So, why not turn off the water supply altogether? It’s essential and more effective to stop the water.

As you’re successfully putting a halt to the overflowing water, cleaning up is a must as you cannot move with precision when the place is wet. Avoid the urge to use or even flush the toilet out of curiosity.

What are the following steps to take?

4 Find your Trusty Plunger

Yes, my friend. It is time to make use of the plunger and handle the problem without any delay. Make sure that the plunger’s head is covered with the water completely. Execute the plunging process as quickly as possible until you notice that the water level is going down.

What happens when it goes down? You may now try and flush the toilet. If it’s still clogged, do the same process over again. If you believe the issue is more than you can handle,  calling in the blocked drain Sydney professionals will do the trick.

How to steer clear from troubles like these? Sometimes, anyone becomes too busy and forgets what they’re doing. Anything, literally anything that is not meant to be flushed in the toilet, will lead to clogging. Take care of your toilet.

Jean Gilmore

Jean Gilmore